There are many kinds of automotive and marine electrical connectors. Some of the common electrical connectors are butt connectors, ring terminals, spade terminals, and quick disconnect connectors.
Butt connectors are widely-used to splice two wires together.
Ring terminals are employed to connect the wire with a stud point being a screw for grounding or similar.
Spade terminals works extremely well like ring terminals though the nice benefit of the spade terminal or fork terminals could be that the stud does ready to accept hook up with it. The spade slip around the stud to get a connection.
Quick disconnect connectors are used to connect with a tab and are available in four tab sizes,.110 tab is 1/8 inch,.187 tab is 3/16 inch,.250 tab is 1/4 inch and.375 tab is 3/8 inch. Motorcycle Electrical Connectors ‘ll find men and women quick disconnect connectors the woman will slide on the male tab. Other electrical connectors include copper lug ring terminals, crimp caps, t tap connectors, plier tap connectors, hook terminals, and pin terminals.
Electrical connectors can be insulated or non insulated are available in several forms of insulation. The non insulated electrical connector is generally bare copper that features a tin plating. Insulated terminals can really be PVC insulated, nylon insulated and also heat shrink insulated. The PVC insulated type are usually the cheapest and quite a few common. PVC is often a harder insulation and will crack when crimped and for this reason I do not recommend using them. Nylon insulation is really a softer insulation will not crack in the event the terminal is crimped. The nylon insulation may also withstand higher temperatures. I recommend using nylon insulated terminals and connectors. Heat shrink insulated terminals and connectors are good for applications where the terminal is subjected to outside elements like high temperatures, rain, snow, and underwater applications.
The warmth shrink insulated terminals with adhesive lining create waterproof connections on the wire. Although heat shrink terminals can be expensive these are the best connectors to work with because the will last the longest and almost never corrode.
When choosing electrical connectors it is advisable to use UL listed terminals and connectors to make sure you are becoming quality connections. I suggest staying away from terminals and connectors which might be made in China due to substandard quality standards and cheap materials they use to really make the connectors. In case you search the internet you will find quality terminals and connectors at cheap pricing.
Contact:
Yeahui Technology Limited
Email: [email protected]
For more info about ECU Wiring Harness internet page: check here.
Be First to Comment