Carbide Burrs (often known as Rotary Burrs) can be used cutting, shaping, grinding and also for the elimination of sharp edges, burrs and excess material (deburring).
1. What material can Carbide Burrs supply on?
Carbide burrs can be used on many materials. Metals including steel, aluminum and cast iron, all kinds of wood, acrylics, fibreglass and plastics. When utilized on soft metals for example gold, platinum and silver, carbide burrs are perfect since they will last a long time with no chipping or breaking.
Steel, Carbon Steel & Stainless
Surefire
Aluminium
Titanium
Cobalt
Nickel
Gold, Platinum & Silver
Ceramics
Fibreglass
Plastic, Carbon fibre Reinforced Plastic (CRP), Glass Fibre Reinforced Plastic (GRP)
Brass, Copper & Bronze
Zinc
Wood
Different cuts of carbide burrs will likely be best suited to a particular materials, begin to see the next point below to discover more regarding the various cuts.
What Do You employ Carbide Burrs In?
Ideally carbide burrs are employed in Air Tools i.e Die Grinders, Pneumatic rotary tools and speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools for instance a Dremel.
Always use a handpiece that runs true i.e without wobble.
Who Uses Carbide Burrs?
Carbide burrs are traditionally used for metalwork, tool making, engineering, model engineering, wood carving, jewellery making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. And so are employed in the aerospace, automotive, dental, metal sculpting, and metal smith industries to mention just some.
2. Carbide Burrs Commonly Are available in Two Cuts; Single Cut and Double Cut (Diamond Cut)
Single cut (one flute) carbide burrs possess a right handed (Up cut) spiral flute. These tend to be in combination with stainless, hardened steel, copper, cast iron, and ferrous metals and can remove material quickly with a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy elimination of material
Milling
Deburring
Cleaning
Creates long chips
Double cut carbide burrs tend to be utilized on ferrous and non ferrous metals, aluminium, soft steel as well as for all non-metal materials like plastics and wood. They have more cutting edges and can remove material faster. Double cut are now and again referrred to as Diamond Cut or Cross Cut (2 flutes cut across one another) leaves a smoother finish than single cut because of producing smaller chips because they cut away the material. Use for medium-light stock removal, deburring, finishing and cleaning. A double cut carbide burr is among the most popular cut and can look at you through most applications.
Medium- light elimination of material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
3. What Speed or RPM if you work with your Carbide Burrs?
The rate of which you have your carbide bur with your rotary tool depends on the information you’ve it on and also the contour being produced however it is safe to say you do not need to exceed speeds of 35,000 RPM.
4. Don’t Apply Excessive Pressure
As with most drill bits and burrs, permit the burr perform work and apply only a little pressure otherwise the cutting edges with the flutes will chip away or become smooth too rapidly, reducing the use of your burr.
5. Carbide Burrs are not as easy Than HSS Burrs
Our Carbide Burrs are machine ground from the specially chosen grade of carbide. As a result of extreme hardness from the Tungsten Carbide they could be used on much more demanding jobs than HSS (High-speed Steel).
Carbide Burrs also perform better at higher temperatures than HSS so that you can run them hotter, as well as longer.
HSS burrs will start to soften at higher temperatures so carbide is definitely a more sensible choice for lengthy term performance.
Which are the Advantages of Tungsten Carbide Burrs?
Endurance
Use for too long production runs
High stock removal
Well suited for using on many hard and hard materials
Ideal for Deburring, finishing, carving, shaping and smoothing welds, moulds, dies and forgings
6. Keep your Carbide Burr On the go
When working with your carbide burr never keep it still for days since this prevents the burr from digging and jabbing in your material causing unsightly marks and roughness.
End while on an ‘up’ stroke for a smoother finish in your work.
Stay Safe:
Always make sure your burr shank is well inserted to your collet and clamped down tightly
Keep pressure light and keep the bur moving, centering on the very best material first
Make sure your effort is secured tightly to your workbench
Don’t snag or jam your burr to your work
Wear eye protection at least, but better still make use of a full shield to your face
To read more about SF-1 Carbide Burrs explore this popular webpage
Be First to Comment