Seven Facts About Tungsten Carbide Burrs And The Best Way To Use Them

Carbide Rotary Burrs bring cutting, shaping, grinding and for the removal of sharp edges, burrs and excess material (deburring) which is that which you talk about in the following article.

For drilling holes or cutting a dent in metal a carbide drill or a carbide end mill, carbide slot drill or perhaps a carbide router is necessary rather than carbide burr. For carving into stone you’d ideally work with a Diamond Burr.


1. Carbide Burrs May be used on Many Materials
Tungsten Carbide burrs works extremely well on many materials: metals including steel, aluminum and certain, all sorts of wood, acrylics, fibreglass and plastics. When applied to soft metals like gold, platinum and silver, carbide burrs are ideal as they can last quite a long time without having chipping or breaking.

Steel, Carbon Steel & Stainless Steel
Iron
Aluminium
Titanium
Cobalt
Nickel
Gold, Platinum & Silver
Ceramics
Fibreglass
Plastic, Graphite Reinforced Plastic (CRP), Glass Fibre Reinforced Plastic (GRP)
Brass, Copper & Bronze
Zinc
Wood

Different cuts of carbide burrs will likely be suitable to certain materials, see the next point below to discover more about the various cuts.

2. Carbide Burrs Commonly Are available in Two Cuts; Single Cut and Double Cut
Single cut (one flute) carbide burrs have a very right handed (Up cut) spiral flute. These usually are used with metal, hardened steel, copper, certain, and ferrous metals and can remove material quickly with a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.

Heavy removing material
Milling
Deburring
Cleaning
Creates long chips

Double cut carbide burrs are generally applied to ferrous and non ferrous metals, aluminium, soft steel and also for all non-metal materials such as plastics and wood. They have more cutting edges and can remove material faster. Double cut are occasionally referrred to as Diamond Cut or Cross Cut (2 flutes cut across the other) will leave a smoother finish than single cut on account of producing smaller chips because they cut away the information. Use for medium-light stock removal, deburring, finishing and cleaning. A double cut carbide burr is regarded as the popular cut and can look at you through most applications.

Medium- light eliminating material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips

3. The different Shapes of Carbide Burrs and How To Utilize them
Making a decision on what fit around use is dependent upon the profile or cut you are planning to achieve.

These different shaped burs will get into many a nook and cranny and produce some interesting profiles.

carbide ball Burrs
Carbide Tree Burrs
Carbide Inverted Cone Burrs
Carbide Pointed Cone & Carbide Round Nose or Ball Nose Burrs
Cylinder Burrs. Round Nose/Ball nose/End Cut
Oval Burrs
Flame Burrs
Countersink Burrs

4. What Speed or RPM the use of your Carbide Burrs?
The speed from which you have your carbide bur inside your rotary tool will depend on the fabric you have it on and also the contour being produced yet it’s pretty sure you don’t need to exceed speeds of 35,000 RPM.

If the burs are chipping easily this may be due to the speed being too slow. However, it’s ideal to get started on the bur off slow, enhancing the speed on the way. High speeds will prevent clogging inside the flutes of one’s burs.

5. Tend not to Apply Too Much Pressure
As with most drill bits and burrs, permit the burr do the work and apply merely a little pressure otherwise the cutting edges in the flutes will chip away or become smooth too soon, reducing the lifetime of your burr.

6. Carbide Burrs are not as easy Than HSS Burrs
Our Carbide Burrs are machine ground from your specially chosen grade of carbide. Due to extreme hardness in the Tungsten Carbide they are often utilized on far more demanding jobs than HSS (Broadband Steel).

Carbide Burrs also perform better at higher temperatures than HSS so that you can run them hotter, as well as longer.

HSS burrs will begin to soften at higher temperatures so carbide is definitely a better choice for long term performance.

7. Keep The Carbide Burr On The Move
When working with your carbide burr do not ensure that is stays still for too long because this may prevent the burr from digging and jabbing to your material causing unsightly marks and roughness.
To learn more about SD-3 Carbide Burrs check this useful web site

Be First to Comment

Leave a Reply