1. WHAT ARE THE CRITERIA?
Can you for example wish to fit Edwardian-type cast-iron radiators? Or do you want to fit radiators at the lowest possible cost? Or perform the radiators must adapt to some form of design need – such as being flush together with the floor?
2. POSITIONING
It was once considered best practice to rate radiators below windows, since they were deemed to be cold spots. However, if your residence is double-glazed, the radiators could be positioned to suit design and space needs since the areas regarding the windows will be just about as warm as the other walls at home.
3. WINDOWS
Be wary about placing radiators opposite a window – there is a possibility that they’ll draw cold air in the window and set up a cold airflow that cuts across the room. Whenever possible, try to set the radiators at right angles for the window using one of the side walls.
4. SIZE & NUMBER
The introduction of double-panel and finned radiators implies that you’ll be able to reduce the size and variety of radiators inside a room for the minimum. This is an excellent option if your room is long and narrow.
5. CALCULATIONS
To some large degree, the quantity and sort of radiators relates to the size as well as the space being heated, so calculate the cubic capacity of the rooms that you might want to heat. Find out the floor area by multiplying the width from the room by its length, then multiply this by its height. For example, to get a room 3m wide, 4m long and 2m high, the sum is 3m x 4m = 12sqm x 2m = 24cu m. You need to heat 24cu m. Use a Mears wheel to calculate the volume of radiators required.
6. UNDERFLOOR HEATING
Underfloor heating is costly to put in, though the water in the system doesn’t have to be heated for the same high temperatures much like a radiator installation, so running costs are lower.
7. INSTALLING UNDERFLOOR HEATING
Underfloor heating might be positioned in existing houses in a number of different locations – under concrete slabs, or suspended under wooden floors and/or in ceiling spaces.
8. TRENCH HEATERS
I have listed small radiators which might be set in trenches so they really are flush with all the floor. These are the best place for those who have floor-to-ceiling windows, and want to have a clean minimal look
9. CONVECTOR HEATERS
Wet boiler system convector heaters are an interesting option, and very good if you need instant heating. The heaters are made up of a number of finned pipes, rather just like a larger type of a vehicle radiator. For doing things, the cold air passes through the fins, gets hot and rises, using the effect that heat arrives in the the top of radiator and cold air enters at the bottom. Some models are fitted with electric fans and dampers that enable you to turn the heatup or right down to fit the bill.
10. SKIRTING RADIATORS
These are a great choice if you want to accomplish an even, all-round background heat in the room which is also heated by a wide open fire. Skirting radiators are plentiful in kit form.
For more details about zamena radiatorov otopleniya please visit web portal: check it out.
Be First to Comment